AFTER OPERATIONS PMCS
Perform these checks after every recovery mission or movement. Allow engine to cool before checking fluids.
Enter your info first. Green OK, red NFMC. Print when done.
Check engine compartment for fluid leaks — oil, coolant, fuel, or hydraulic fluid on ground or components
Check engine oil level — top off if below MIN; investigate if significantly low
Check coolant level in surge tank — top off if low; never open cap when hot
Check transmission fluid level — top off if below MIN
Check hydraulic oil level — top off if below MIN; check for new leaks
Inspect main winch cable after use — check for kinks, broken strands, or damage from recovery operations
Inspect boom and spade for damage — check for cracks or deformation sustained during recovery operations
Inspect track and road wheels — check for damage, thrown track, or loose hardware after operations
Clean and lubricate winch cables — apply cable lubricant; remove debris from cable and drum
Annotate all faults on 5988 — report to motor sergeant; document recovery operations performed
NFMC — No Further Movement Criteria. Any fault on an NFMC item means the vehicle is non-mission-capable and must not be dispatched until repaired. Annotate on 5988 immediately.
Complete all items above to unlock printing
Spot something off?
Wrong item, missing step, TM discrepancy — tell us. Every report helps keep this accurate for the formation.
No login needed.