TC 3-25.26 — Dead Reckoning & Terrain Association
Source: TC 3-25.26 (Army Pubs)
Dead Reckoning
Dead reckoning is a method of navigation that uses a known starting point, direction of travel, and distance traveled to determine current location.
A pace count is the number of paces (two steps) taken to cover 100 meters. Each Soldier must know their personal pace count. Average: 62–66 paces per 100 meters.
Pace beads (ranger beads) are used to track distance traveled. Move one bead for every 100 meters. After 1,000 meters, move a bead on the upper section.
A compass march uses a compass bearing and pace count to navigate from one point to another. Maintain the bearing and count paces to the destination.
An offset is a deliberate deviation from the direct route to avoid obstacles. After bypassing the obstacle, return to the original azimuth.
A deliberate offset is used when the destination is on a linear feature (road, stream). Offset to one side so you know which direction to turn when you hit the feature.
Terrain Association & Features
Terrain association is a navigation method that uses terrain features to determine location. The navigator compares the terrain on the map to the terrain on the ground.
Major terrain features: Hill (high ground), Valley (low ground between hills), Ridge (line of high ground), Saddle (low point between two hills), Depression (low area with higher ground all around).
Minor terrain features: Draw (small valley), Spur (short ridge extending from a larger ridge), Cliff (vertical or near-vertical slope), Cut (man-made cut through high ground), Fill (man-made fill of low ground).
Contour lines connect points of equal elevation. The contour interval is the vertical distance between contour lines. Closely spaced lines indicate steep terrain; widely spaced lines indicate gentle terrain.
Index contours are every fifth contour line, drawn heavier and labeled with the elevation. They make it easier to read elevation on a map.
Resection is a method of determining your location by taking azimuths to two or more known points and back-plotting them on the map. Where the lines intersect is your location.